Allen-Bradley Control Panels Built in Houston

WETS AI builds Allen-Bradley control panels in Houston, Texas. Most use Micro800 controllers programmed in Connected Components Workbench (CCW), and larger systems use CompactLogix or ControlLogix in Studio 5000, with PanelView HMIs and PowerFlex drives. Each panel is built to UL 508A, programmed in-house when you need it, and tested before it ships.

Allen-Bradley Components We Build With

Allen-Bradley, from Rockwell Automation, is the most common control platform in many North American plants. We build complete panels around it, from the controller and I/O to the drives and operator screens.

  • Micro800 controllers
  • CompactLogix controllers
  • ControlLogix controllers
  • PanelView 800 and PanelView Plus HMIs
  • PowerFlex drives
  • EtherNet/IP networks
  • Allen-Bradley starters and relays
  • Safety relays
Open PLC control panel with DIN rail components and wire duct
Open PLC control panel with DIN rail components

A Typical Allen-Bradley System

How the controller, network, HMI, remote I/O and drives fit together in a typical panel we build.

  • Micro800 controllers programmed in CCW for most systems
  • CompactLogix or ControlLogix in Studio 5000 as systems grow
  • PanelView HMIs and PowerFlex drives on EtherNet/IP
  • Expansion I/O sized to the signal list
Typical Allen-Bradley control system built by WETS AI: Micro800 or CompactLogix controllers programmed in Connected Components Workbench (CCW) or Studio 5000, connected over EtherNet/IP to PanelView HMIs, expansion and remote I/O and PowerFlex drives.
Swipe sideways to see the whole diagram

Micro800, CompactLogix or ControlLogix?

Allen-Bradley offers three controller families for the panels we build.

We help you pick the one that fits the size of your system today and leaves room to grow.

Micro800CompactLogixControlLogix
Typical system sizeSmall machines, pump stations and skidsSmall to mid-size systemsLarge systems with many I/O points
Form factorCompact controller with plug-in modulesCompact, DIN-rail mountedModular chassis
Programming softwareConnected Components Workbench (CCW)Studio 5000 Logix DesignerStudio 5000 Logix Designer
Typical HMIPanelView 800PanelView PlusPanelView Plus

Most of the Allen-Bradley panels we build use Micro800 controllers in CCW. When a system outgrows Micro800, we move it to CompactLogix or ControlLogix.

Programmed in CCW and Studio 5000

Connected Components Workbench (CCW) is the software we use most. It programs Micro800 controllers, configures PowerFlex 520-series drives and builds PanelView 800 screens in one project, which keeps small and mid-size systems simple to support.

For larger systems we program CompactLogix and ControlLogix controllers in Studio 5000 Logix Designer. Either way, programs are structured, commented, and follow your company standard when you have one.

We also move older systems, such as SLC 500 and PLC-5, onto current Allen-Bradley controllers, keeping the sequences your operators already know.

Relays and terminals with printed wire identification sleeves on every conductor
Relays and terminals with printed wire identification sleeves

Allen-Bradley Panel Questions

Do you program Allen-Bradley PLCs?

Yes. We program Micro800 controllers in Connected Components Workbench (CCW), and CompactLogix and ControlLogix controllers in Studio 5000, with PanelView 800 or PanelView Plus HMI screens.

What is Connected Components Workbench (CCW)?

CCW is Rockwell Automation's software for Micro800 controllers, PanelView 800 HMIs and PowerFlex 520-series drives. It is the Allen-Bradley software we use most.

Can you upgrade an SLC 500 or PLC-5 system?

Yes. We migrate older Allen-Bradley systems to Micro800, CompactLogix or ControlLogix, depending on size, and rebuild or modify the panel to suit.

Do you use PowerFlex drives?

Yes. We build VFD panels with PowerFlex drives and set up their communication with the controller.

Are you affiliated with these manufacturers?

No. WETS AI is an independent panel builder. We buy components through normal distribution channels and build with the brands our customers specify.

How long does a panel take?

About 16 weeks on average from order to shipment. The real figure depends on panel size and on component lead times, so we confirm a schedule with every quotation.

Related Panels & Services

PLC & HMI Programming

Programs written in-house for Allen-Bradley, Siemens and Schneider Electric, tested at FAT.

PLC Control Panels

Controllers, I/O, networks and power, built to UL 508A and tested point by point.

Need an Allen-Bradley Panel?

Send your drawings or I/O list and preferred controller. We will quote the panel and the programming.

Call Request a Quote